When you open the box there is a small white connector with three pins (Inbetween the VDF and ethernet connector)
Connecting the uart cable, leave the + disconnected.
[ETHERNET] [ uart ] [VDF connector] [........] [1 2 3] [.............] 1 -> White -> RxD 2 -> Green -> TxD 3 -> Black -> Ground
Connect PuTTY to the comport assigned to your uart connector:
Boot your Zidoo X9 and you should see a full log (below) and have a commandprompt from which you can control your device.
Full log from cold boot to running:
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2015.03.28 16:00:51 =~=~=~=~=~=~=~=~=~=~=~=
UART_115200
AC_ON
BIST0-OK
BIST1-OK
_U
Relocation Offset is: 0df00000
[AT][MB][start ub][601]
U-Boot 2011.06-00000-g104f431-dirty (Mar 06 2015 - 10:41:44)
[35m[NOS] UtopiaInit [m
1st UTOPIARegisterToUtopia is done [35m[MBoot] Driver Register to Utopia [m
uboot held at [2e6ddf60~30000000],size=019220a0
CPU : Napoli
Board: BD_MST190A_D01A_S_NAPOLI
DRAM: 256 MiB
Now running in RAM - U-Boot at: 2f100000
eMMC: HS200 200MHz
eMMC 7.28 GB [E8FFF8h]
In: serial
Out: serial
Err: serial
Net: No ethernet found.
MAC: 0xdc: 0xc0: 0xdb: 0xb0:0xab: 0xfb
[CPU INFO] cpu opencreate instance at 2e7d77a8 with private size 44 bytes at 2e7d77f0
CPUIoctl - MDrv_CMD_CPU_QueryClock
[UTOPIA INFO] close moduleNames[38]: MODULE_CPU
msIR_Initialize
[AT][MBoot][Driver Init][879]
~~~pbResult:1
Mdrv_FP_SM1628_Init
MPOOL size : 0x200000
Changelist: 00112233
============= set bootargs ===============
Unknown command 'if_51OnRam_set' - try 'help'
Hit any key to stop autoboot: 0
AC on
fore uup IRKey [0xff]
create instance at 2e7d7aa0 with private size 184 bytes at 2e7d7ae8
MDrv_PNL_Init u32PnlRiuBaseAddr = 1f200000
MDrv_PNL_Init u32PMRiuBaseAddr = 1f000000
[_MDrv_PNL_Init_LPLL][315]pstPanelInitData->u16Width=1920, pstPanelInitData->u16Height=1080
[_MDrv_PNL_Init_LPLL][317]u16HTotal=2200,u16VTotal=1125,pstPanelInitData->u16HTotal=2200,pstPanelInitData->u16VTotal=1125, u16DefaultVFreq=600
[_MDrv_PNL_Init_Output_Dclk][361]pstPanelInitData->u16Width=1920, pstPanelInitData->u16Height=1080
[_MDrv_PNL_Init_Output_Dclk][363]u16HTotal=2200,u16VTotal=1125,pstPanelInitData->u16HTotal=2200,pstPanelInitData->u16VTotal=1125, u16DefaultVFreq=600
[MApi_XC_MLG_GetStatus, 1555]No instance existed, please get an instance by calling MApi_XC_Init() first
Init PWM2create instance at 2e7d7ba8 with private size 1696 bytes at 2e7d7bf0
[XC,Version] [0;36m
[mMApi_XC_Init_U2, 862, pXC_InitData->stPanelInfo.eLPLL_Type=1
Wait for PM51 standby DRAM ...........PM51 run ok...........create instance at 2e7d87d8 with private size 304 bytes at 2e7d8820
[AT][MB][JPD Decode][2157]
[UTOPIA INFO] close moduleNames[35]: MODULE_NJPEG_EX
create instance at 2e7d87d8 with private size 16 bytes at 2e7d8820
[GOP INFO] gop opencreate instance at 2e7d8838 with private size 108 bytes at 2e7d8880
[IZZY] (_GOP_RegisterAllCBFunc)
[GOP_GWIN_TriggerRegWriteIn][929] GOP not support this GOPType = 5
[AT][MB][Show Logo][2202]
[0;34m******************************* [0m
[0;34m* tee Authentication SUCCESS !! * [0m
[0;34m******************************* [0m
The version of tee.bin is 00000000
MPOOL size : 0x200000
[0;34m******************************* [0m
[0;34m* boot Authentication SUCCESS !! * [0m
[0;34m******************************* [0m
[AT][MBoot][Boot Nuttx][2654]
## Booting kernel from Legacy Image at 25000000 ...
Image Name: MStar-linux
Image Type: ARM Linux Multi-File Image (uncompressed)
Data Size: 4096246 Bytes = 3.9 MiB
Load Address: 20208000
Entry Point: 20208000
Contents:
Image 0: 3767416 Bytes = 3.6 MiB
Image 1: 328818 Bytes = 321.1 KiB
## Loading init Ramdisk from multi component Legacy Image at 25000000 ...
-usb_stop(USB_PORT0)
-usb_stop(USB_PORT1)
-usb_stop(USB_PORT2)
-usb_stop(USB_PORT3)
Loading Multi-File Image ... OK
[AT][MB][start kr][2711]
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
KERN-3.1.10.00734947
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.10 (xiaoweihua@ubuntu) (gcc version 4.7.2 (Sourcery CodeBench Lite 2012.09-64) ) #3 SMP PREEMPT Wed Feb 4 09:58:40 CST 2015
[ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=18c53c7d
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: napoli
[ 0.000000] KDebug = 1
[ 0.000000]
[ 0.000000] LX_MEM = 0x20200000, 0xF300000
[ 0.000000] LX_MEM2 = 0x37600000, 0x23A00000
[ 0.000000] LX_MEM3 = 0xAE700000, 0x31900000
[ 0.000000] EMAC_LEN= 0x100000
[ 0.000000] DRAM_LEN= 0x80000000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c1b5b000 s10112 r8192 d14464 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 404227
[ 0.000000] Kernel command line: console=ttyS0,115200 androidboot.console=ttyS0 root=/dev/ram rw rootwait init=/init LX_MEM=0xF300000 EMAC_MEM=0x100000 DRAM_LEN=0x80000000 LX_MEM2=0x37600000,0x23A00000 LX_MEM3=0xAE700000,0x31900000 CORE_DUMP_PATH=/data/core_dump.%%p.gz KDebug=1 panel_path=/config/panel/HDMITX_1080_60P.ini PM51_ADDR=0x200B0000 PM51_LEN=0x10000 BOOTLOGO_IN_MBOOT ENV_VAR_OFFSET=0x0 ENV_VAR_SIZE=0x10000 ENV=EMMC SECURITY=ON resolution=HDMITX_RES_1920x1080p_60Hz mstarchipIDL=1906 mstarchipIDM=46575 mstarchipIDH=13933 BOOTTIME_SBOOT=601 BOOTTIME_UBOOT=2711
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 243MB 570MB 793MB = 1606MB total
[ 0.000000] Memory: 1617088k/1617088k available, 27456k reserved, 858112K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xf0800000 - 0xf8000000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06ef000 (7068 kB)
[ 0.000000] .init : 0xc06ef000 - 0xc0735780 ( 282 kB)
[ 0.000000] .data : 0xc0736000 - 0xc07790a0 ( 269 kB)
[ 0.000000] .bss : 0xc07790c4 - 0xc0943da0 (1836 kB)
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:256 nr_irqs:256 256
[ 0.000000] [35mGlobal Timer Frequency = 550 MHz [m
[ 0.000000] [35mCPU Clock Frequency = 1100 MHz [m
[ 0.000000] fre = 800000000, mult= -1610612736, shift= 31
[ 0.000000] sched_clock: 32 bits at 800MHz, resolution 1ns, wraps every 5368ms
[ 0.000000] [AT][KR][reset timer][3470]
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [ttyS0] enabled
[ 0.192400] Calibrating delay loop...
[ 0.194907] 2189.31 BogoMIPS (lpj=4378620)
[ 0.197888] pid_max: default: 32768 minimum: 301
[ 0.201231] Security Framework initialized
[ 0.204283] Mount-cache hash table entries: 512
[ 0.208129] Initializing cgroup subsys debug
[ 0.211140] Initializing cgroup subsys cpuacct
[ 0.214267] Initializing cgroup subsys freezer
[ 0.217416] CPU: Testing write buffer coherency: ok
[ 0.220886] ftrace: allocating 20759 entries in 62 pages
[ 0.242724]
[ 0.242727] Kernel_Level test :kernel_init 936
[ 0.246996] smp_twd: clock not found: -2
[ 0.249732] Calibrating local timer... 550.50MHz.
[ 0.267044] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.305677] pen_release = 0x00000001, addr= 0xc077799c, pen_release ptr = 0x00000001
[ 0.305683] CPU1: Booted secondary processor
[ 0.312623] CPU1: Unknown IPI message 0x1
[ 0.327694] pen_release = 0x00000002, addr= 0xc077799c, pen_release ptr = 0x00000002
[ 0.327700] CPU2: Booted secondary processor
[ 0.334629] CPU2: Unknown IPI message 0x1
[ 0.349724] pen_release = 0x00000003, addr= 0xc077799c, pen_release ptr = 0x00000003
[ 0.349730] CPU3: Booted secondary processor
[ 0.356665] CPU3: Unknown IPI message 0x1
[ 0.360634] Brought up 4 CPUs
[ 0.360643] SMP: Total of 4 processors activated (8757.24 BogoMIPS).
[ 0.361547] devtmpfs: initialized
[ 0.370921] [35mFunction = cma_init_reserved_areas, Line = 1052 [m
[ 0.375486] NET: Registered protocol family 16
[ 0.386163] L310 cache controller enabled
[ 0.388959] l2x0: 8 ways, CACHE_ID 0x410000c9, AUX_CTRL 0x32480000, Cache size: 1048576 B
[ 0.394606] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[ 0.399291] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
[ 0.404343] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.424296] bio: create slab at 0
[ 0.427857] SCSI subsystem initialized
[ 0.430766] usbcore: registered new interface driver usbfs
[ 0.434757] usbcore: registered new interface driver hub
[ 0.438552] usbcore: registered new device driver usb
[ 0.442720] eMMC: has SD 0513
[ 0.445308] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.450236] Switching to clocksource timer1
[ 0.453147] stop_machine_cpu_stop smp=1
[ 0.453152] stop_machine_cpu_stop smp=3
[ 0.453157] stop_machine_cpu_stop smp=2
[ 0.453162] stop_machine_cpu_stop smp=0
[ 0.486385] NET: Registered protocol family 2
[ 0.489496] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.494698] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.500759] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.505941] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.510506] TCP reno registered
[ 0.512683] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.516782] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.521339] NET: Registered protocol family 1
[ 0.524557] RPC: Registered named UNIX socket transport module.
[ 0.528646] RPC: Registered udp transport module.
[ 0.531893] RPC: Registered tcp transport module.
[ 0.535135] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.539720] Trying to unpack rootfs image as initramfs...
[ 0.545667]
[ 0.545669] eMMC: HS200 200MHz
[ 0.553674] [mmc]:mmc_decode_cid:113 cid.prv 0x1
[ 0.555281] Freeing initrd memory: 324K
[ 0.555288] NetWinder Floating Point Emulator V0.97 (extended precision)
[ 0.555334] PMU: registered new PMU device of type 0
[ 0.556012] audit: initializing netlink socket (disabled)
[ 0.556040] type=2000 audit(0.416:1): initialized
[ 0.574643] [mmc]:mmc_read_ext_csd:291 ext_csd.sectors 0xe90000 prod_name 8WMB3R BOOT_MULTI 0x20
[ 0.580836] mmc0: new high speed MMC card at address 0001
[ 0.584796] [mmc]:mmc_rescan_try_freq:1970 mmc0: eMMC completed
[ 0.612435] highmem bounce pool size: 64 pages
[ 0.615819] ashmem: initialized
[ 0.626287] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.631415] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.636614] NTFS driver 2.1.30 [Flags: R/O].
[ 0.640069] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.643145] fuse init (API version 7.17)
[ 0.646617] msgmni has been set to 1483
[ 0.649999] io scheduler noop registered
[ 0.652716] io scheduler deadline registered
[ 0.655717] io scheduler cfq registered (default)
[ 0.659203] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.663750] serial8250: ttyS0 at I/O 0xfd201300 (irq = 192) is a 16550
[ 0.668426] serial8250: ttyS1 at I/O 0xfd220c00 (irq = 231) is a 16550
[ 0.673101] serial8250: ttyS2 at I/O 0xfd220d00 (irq = 242) is a 16550
[ 0.684091] brd: module loaded
[ 0.689529] loop: module loaded
[ 0.692506] nbd: registered device at major 43
[ 0.701813] PPP generic driver version 2.4.2
[ 0.705033] PPP Deflate Compression module registered
[ 0.708525] PPP BSD Compression module registered
[ 0.712169] PPP MPPE Compression module registered
[ 0.715476] NET: Registered protocol family 24
[ 0.718569] tun: Universal TUN/TAP device driver, 1.6
[ 0.722057] tun: (C) 1999-2004 Max Krasnyansky
[ 0.726619] MStar xHCI init...
[ 0.728761] xHCI_660401
[ 0.730507] Mstar-xhci-1 H.W init
[ 0.732809] Mstar_xhc_init version:20140425
[ 0.737108]
[ 0.737110] [ XHC: get efuse value: 0x83fe ]
[ 0.741216] XHCI_enable_PPC: Turn on USB3.0 port power
[ 0.744822] Addr: 0x102b02 bit_num: 0 low_active:8
[ 0.748137] BC disable
[ 0.749830] Mstar-xhci-1 Mstar-xhci-1.0: Mstar xHCI Host Controller
[ 0.754224] Mstar-xhci-1 Mstar-xhci-1.0: new USB bus registered, assigned bus number 1
[ 0.761263] Mstar-xhci-1 Mstar-xhci-1.0: irq 194, io mem 0xfd320000
[ 0.765650] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.770336] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.775317] usb usb1: Product: Mstar xHCI Host Controller
[ 0.779043] usb usb1: Manufacturer: Linux 3.1.10 mstar_xhci_hcd
[ 0.783127] usb usb1: SerialNumber: mstar
[ 0.786352] hub 1-0:1.0: USB hub found
[ 0.788957] hub 1-0:1.0: 1 port detected
[ 0.791946] Mstar-xhci-1 Mstar-xhci-1.0: Mstar xHCI Host Controller
[ 0.796289] Mstar-xhci-1 Mstar-xhci-1.0: new USB bus registered, assigned bus number 2
[ 0.801806] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.806493] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.811474] usb usb2: Product: Mstar xHCI Host Controller
[ 0.815200] usb usb2: Manufacturer: Linux 3.1.10 mstar_xhci_hcd
[ 0.819285] usb usb2: SerialNumber: mstar
[ 0.822481] hub 2-0:1.0: USB hub found
[ 0.825084] hub 2-0:1.0: 1 port detected
[ 0.828466] mousedev: PS/2 mouse device common for all mice
[ 0.832562] usbcore: registered new interface driver xpad
[ 0.837024] using rtc device, rtc-mstar, for alarms
[ 0.840292] rtc-mstar rtc-mstar: rtc core: registered rtc-mstar as rtc0
[ 0.845242] lirc_dev: IR Remote Control driver registered, major 253
[ 0.849688] IR NEC protocol handler initialized
[ 0.852817] IR RC5(x) protocol handler initialized
[ 0.856124] IR RC6 protocol handler initialized
[ 0.859245] IR JVC protocol handler initialized
[ 0.862372] IR Sony protocol handler initialized
[ 0.865559] IR RC5 (streamzap) protocol handler initialized
[ 0.869403] IR MCE Keyboard/mouse protocol handler initialized
[ 0.873426] IR LIRC bridge handler initialized
[ 0.876493] Linux video capture interface: v2.00
[ 0.879770] gspca: v2.13.0 registered
[ 0.882405] usbcore: registered new interface driver uvcvideo
[ 0.886372] USB Video Class driver (1.1.1)
[ 0.889854] device-mapper: uevent: version 1.0.3
[ 0.893398] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
[ 0.899443] mmcblk0: mmc0:0001 8WMB3R 7.28 GiB
[ 0.902689] mmcblk0boot0: mmc0:0001 8WMB3R partition 1 4.00 MiB
[ 0.906892] mmcblk0boot1: mmc0:0001 8WMB3R partition 2 4.00 MiB
[ 0.911339] emmc_partition()
[ 0.917593] [emmc]Start_block=4096, block_count=6144
[ 0.921098] Start_block=10240, block_count=4096
[ 0.924228] Start_block=14336, block_count=1024
[ 0.927352] Start_block=15360, block_count=20480
[ 0.930571] Start_block=35840, block_count=8192
[ 0.933703] Start_block=44032, block_count=12288
[ 0.936893] Start_block=56320, block_count=7340032
[ 0.940781] Start_block=7396352, block_count=512
[ 0.943973] Start_block=7396864, block_count=1433600
[ 0.947395] Start_block=8830464, block_count=4194304
[ 0.950824] Start_block=13024768, block_count=1228800
[ 0.954312] Start_block=14253568, block_count=122880
[ 0.957744] Start_block=14376448, block_count=20480
[ 0.961113] Start_block=14396928, block_count=16384
[ 0.964480] Start_block=14413312, block_count=32768
[ 0.968420]
[ 0.969450] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15emmc_partition()
[ 0.979482] 0x0
[ 0.980733] mmcblk0boot1: unknown partition table
[ 0.984519] emmc_partition()
[ 0.987108] 0x5eaa
[ 0.988539] mmcblk0boot0: unknown partition table
[ 0.992219] This is hidraw init for linux source with original trylock patch!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[ 1.002797] usbcore: registered new interface driver usbhid
[ 1.006645] usbhid: USB HID core driver
[ 1.009847] logger: created 256K log 'log_main'
[ 1.013123] logger: created 256K log 'log_events'
[ 1.016517] logger: created 256K log 'log_radio'
[ 1.019863] logger: created 256K log 'log_system'
[ 1.023679] Mstar_emac: [ PHY Addr ] ==> :0
[ 1.026606] Mstar_emac: alloRAM_VA_BASE = 0xF0A00000 alloRAM_PA_BASE= 0x2F500000 alloRAM_SIZE= 0x100000
[ 1.034251] RBQP_BASE = 2f504000
[ 1.037036] >> [sdmmc] ms_sdmmc Driver Initializing...
[ 1.040646] PM_GPIO_NUM:0
[ 1.042783] >> [sdmmc_0] Get CD => (1)
[ 1.042788] >> [sdmmc_0] CDZ use Ext GPIO IRQ: 193
[ 1.042794] >> [sdmmc_0] Probe Devices...(Ret:0)
[ 1.043171] [0000000225][MAD_ALSA][001714] <6>Linux Kernel Version : 3.1.10
[ 1.043178] [0000000225][MAD_ALSA][001718] <6>ALSA Kernel Version : 1.0.24
[ 1.043184] [0000000225][MAD_ALSA][001720] <6>MStar ALSA Driver Version : 3.1.8
[ 1.043190] [0000000225][MAD_ALSA][001721] <6>Initiate MStar ALSA driver engine
[ 1.043196] [0000000225][MAD_ALSA][001586] <6>Go to register MStar ALSA driver
[ 1.044337] [0000000226][MAD_ALSA][001650] <6>MStar ALSA driver is registered to slot 0
[ 1.044459] [0000000226][MAD_ALSA][001926] <6>Initiate MStar ALSA core driver
[ 1.044468] [0000000226][MAD_ALSA][000285] <6>Hal Driver 'MAD NAPOLI' is hooked.
[ 1.044474] [0000000226][MAD_ALSA][000286] <6>MStar Core Version : 3.1.10
[ 1.044752] [35mFunction = CPU_calibrating_init, Line = 779 [m
[ 1.044759] [35mFunction = init_procfs_msg, Line = 760, current_frequency = 1600000 [m
[ 1.108343] [35mFunction = integrator_cpufreq_init, Line = 212, policy->cpu=0, integrator_get return 1100000 [m
[ 1.115517] [35mFunction = integrator_cpufreq_init, Line = 212, policy->cpu=1, integrator_get return 1100000 [m
[ 1.122698] [35mFunction = integrator_cpufreq_init, Line = 212, policy->cpu=2, integrator_get return 1100000 [m
[ 1.129928] [35mFunction = integrator_cpufreq_init, Line = 212, policy->cpu=3, integrator_get return 1100000 [m
[ 1.137088] blcr: vmadump: (from bproc-BPROC_VERSION) Erik Hendriks
[ 1.142551] blcr: vmadump: Modified for blcr 0.8.5
[ 1.147772] blcr: Berkeley Lab Checkpoint/Restart (BLCR) module version 0.8.5.
[ 1.152754] blcr: Parameter cr_io_max = 0x4000000
[ 1.156120] blcr: Supports kernel interface version 0.10.3.
[ 1.160085] blcr: Supports context file format versions 8 though 9.
[ 1.164526] blcr: http://ftg.lbl.gov/checkpoint
[ 1.170423] usbcore: registered new interface driver snd-usb-audio
[ 1.174692] ALSA device list:
[ 1.176744] #0: MStar MPEG Audio Decoder No.00
[ 1.180194] oprofile: using arm/armv7-ca9
[ 1.183046] Netfilter messages via NETLINK v0.30.
[ 1.186344] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.190940] ctnetlink v0.93: registering with nfnetlink.
[ 1.194614] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 1.199416] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 1.203807] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.207585] TCP cubic registered
[ 1.210591] NET: Registered protocol family 10
[ 1.214322] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.218133] IPv6 over IPv4 tunneling driver
[ 1.222034] NET: Registered protocol family 17
[ 1.225128] NET: Registered protocol family 15
[ 1.228279] Bridge firewalling registered
[ 1.231049] 8021q: 802.1Q VLAN Support v1.8
[ 1.233956] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 1.240483] rtc-mstar rtc-mstar: setting system clock to 2007-01-01 12:00:00 UTC (1167652800)
[ 1.246515] [SERIAL INPUT MANAGE] Managed tty_struct(.name:ttyS0) Setup!!!
[ 1.251348] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 1.255436] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 1.257504] >> [sdmmc_0] Get RO => (0)
[ 1.259656] >> [sdmmc_0] Set IOS => Clk=32000000 (Real=32000000)
[ 1.259723] mmc1: new high speed SDHC card at address aaaa
[ 1.260065] mmcblk1: mmc1:aaaa SE32G 29.7 GiB
[ 1.260419] emmc_partition()
[ 1.267012] 0x0
[ 1.267053] mmcblk1: p1
[ 1.277684] [35mFunction = n_tty_open, Line = 1899, [KDEBUGD] enter : NA [m
[ 1.277964] [mmc]:mmc_rescan_try_freq:1966 mmc1: sd completed
[ 1.286557] [AT][KR][start init][5341]
[ 1.289151] [AutoTest][Kernel][start Initprocess][5341]
[ 1.293780] [SERIAL INPUT MANAGE] Managed tty_struct(.name:ttyS0) is freed !!!
[ 1.301290] init: /init.napoli.rc: 139: ignored duplicate definition of service 'loadwifi'
[ 1.307008] init: /init.napoli.rc: 143: ignored duplicate definition of service 'loadwifi'
[ 1.312822] init: /init.napoli.rc: 238: ignored duplicate definition of service 'mdnsd'
[ 1.318630] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[ 1.405397] init: /dev/hw_random not found
[ 1.408346] [SERIAL INPUT MANAGE] Managed tty_struct(.name:ttyS0) Setup!!!
[ 1.413185] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 1.417275] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 1.421061] [35mFunction = n_tty_open, Line = 1899, [KDEBUGD] enter : NA [m
[ 1.426044] [SERIAL INPUT MANAGE] Managed tty_struct(.name:ttyS0) is freed !!!
[ 1.431088] [SERIAL INPUT MANAGE] Managed tty_struct(.name:ttyS0) Setup!!!
[ 1.435907] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 1.439994] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 1.443781] [35mFunction = n_tty_open, Line = 1899, [KDEBUGD] enter : NA [m
A N D R O I D
[ 1.455788] [SERIAL INPUT MANAGE] Managed tty_struct(.name:ttyS0) is freed !!!
[ 1.494248] fs_mgr: Warning: unknown flag block_validity
[ 1.497954] fs_mgr: Warning: unknown flag nodiscard
[ 1.501352] fs_mgr: Warning: unknown flag data=ordered
[ 1.504920] fs_mgr: Warning: unknown flag journal_checksum
[ 1.508735] fs_mgr: Warning: unknown flag block_validity
[ 1.512423] fs_mgr: Warning: unknown flag nodiscard
[ 1.515811] fs_mgr: Warning: unknown flag data=ordered
[ 1.519356] fs_mgr: Warning: unknown flag journal_checksum
[ 1.523187] fs_mgr: Warning: unknown flag block_validity
[ 1.526873] fs_mgr: Warning: unknown flag nodiscard
[ 1.530261] fs_mgr: Warning: unknown flag data=ordered
[ 1.533827] fs_mgr: Warning: unknown flag journal_checksum
[ 1.537640] fs_mgr: Warning: unknown flag block_validity
[ 1.541333] fs_mgr: Warning: unknown flag nodiscard
[ 1.544720] fs_mgr: Warning: unknown flag data=ordered
[ 1.548286] fs_mgr: Warning: unknown flag journal_checksum
[ 1.555513] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null)
[ 1.575210] EXT4-fs (mmcblk0p11): 6 orphan inodes deleted
[ 1.578958] EXT4-fs (mmcblk0p11): recovery complete
[ 1.588451] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null)
[ 1.730518] EXT4-fs (mmcblk0p10): 10 orphan inodes deleted
[ 1.734332] EXT4-fs (mmcblk0p10): recovery complete
[ 1.747765] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null)
[ 1.756532] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: (null)
[ 1.765171] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: (null)
[ 1.787107] EXT4-fs (mmcblk0p14): recovery complete
[ 1.790639] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: (null)
[ 1.799421] EXT4-fs (mmcblk0p15): recovery complete
[ 1.802825] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: (null)
[ 1.808522] fs_mgr: Cannot mount filesystem on /dev/block/platform/mstar_mci.0/by-name/RTPM at /RTPM
[ 1.814852] init: fs_mgr_mount_all returned an error
[ 1.835998] UMP<2>: Inserting UMP device driver. Compiled: Jun 30 2014, time: 15:44:04
[ 1.841985] UMP<2>: Using OS memory backend, allocation limit: 536870912
[ 1.846643] UMP: UMP device driver r4p0-00rel0-CL902512 loaded
[ 1.928938] Mali<2>: Inserting Mali v401 device driver.
[ 1.932643] Mali<2>: Compiled: Jun 30 2014, time: 15:44:40.
[ 1.936514] Mali<2>: Driver revision: r4p0-00rel0-CL902512
[ 1.940334] Mali<2>: mali_module_init() registering device
[ 1.944855] Mali<2>: mali_module_init() registering driver
[ 1.948710] Mali<2>: mali_probe(): Called for platform device mali-utgard
[ 1.953437] Mali<2>: Using device defined memory settings (dedicated: 0x00000000@0x00000000, shared: 0x40000000)
[ 1.960487] Mali<2>: Using device defined frame buffer settings (0xF0000000@0x00000000)
[ 1.966031] Mali<2>: Memory Validator installed for Mali physical address base=0x00000000, size=0xF0000000
[ 1.973214] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP0
[ 1.977204] Mali<2>: Mali PP: Base address of PP core: 0xfd348000
[ 1.981470] Mali<2>: Found Mali GPU Mali-450 MP r0p0
[ 1.985014] Mali<2>: Mali DLBU: Initializing
[ 1.988005] Mali<2>: Mali DMA: Created Mali APB DMA unit
[ 1.991678] Mali<2>: Mali L2 cache: Created Mali_L2: 8K, 4-way, 64byte cache line, 128bit external bus
[ 1.998264] Mali<2>: Mali L2 cache: Created Mali_L2: 128K, 4-way, 64byte cache line, 128bit external bus
[ 2.004848] Mali<2>: Mali MMU: Creating Mali MMU: Mali_GP_MMU
[ 2.008852] Mali<2>: Mali GP: Creating Mali GP core: Mali_GP
[ 2.012796] Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP0_MMU
[ 2.016855] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP0
[ 2.020845] Mali<2>: Mali PP: Base address of PP core: 0xfd348000
[ 2.025092] Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP1_MMU
[ 2.029152] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP1
[ 2.033141] Mali<2>: Mali PP: Base address of PP core: 0xfd34a000
[ 2.037383] Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP2_MMU
[ 2.041444] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP2
[ 2.045440] Mali<2>: Mali PP: Base address of PP core: 0xfd34c000
[ 2.049682] Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP3_MMU
[ 2.053746] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP3
[ 2.057737] Mali<2>: Mali PP: Base address of PP core: 0xfd34e000
[ 2.061980] Mali<2>: Starting new virtual group for MMU PP broadcast core Mali_PP_MMU_Broadcast
[ 2.068011] Mali<2>: Mali DLBU: Creating Mali dynamic load balancing unit: Mali_DLBU
[ 2.073377] Mali<2>: Mali Broadcast unit: Creating Mali Broadcast unit: Mali_Broadcast
[ 2.078861] Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP_MMU_Broadcast
[ 2.083451] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP_Broadcast
[ 2.088004] Mali<2>: Mali PP: Base address of PP core: 0xfd366000
[ 2.092241] Mali<2>: 4+0 PP cores initialized
[ 2.095265] Mali<2>: Mali GPU Utilization: Platform has it's own policy
[ 2.099936] Mali<2>: Mali GPU Utilization: Utilization handler installed with interval 1000
[ 2.106522] Mali<2>: mali_probe(): Successfully initialized driver for platform device mali-utgard
[ 2.112988] Mali: Mali device driver loaded
[ 2.123470] mdrv_software_ir: version magic 'SMP mod_unload ARMv7 ' should be '3.1.10 SMP preempt mod_unload ARMv7 '
[ 2.135749] [36m
[ 2.135751] Function = Mdrv_CPU_Freq_Check_callback, Line = 704, (freq = 1100000) != (current_frequency = 1600000) [m
[ 2.136192] =====MDrv_IR_Input_Init====
[ 2.136205] Registered IR keymap rc-mstar-tv
[ 2.136605] input: MStar Smart TV IR Receiver as /devices/virtual/rc/rc0/input0
[ 2.136946] rc0: MStar Smart TV IR Receiver as /devices/virtual/rc/rc0
[ 2.137308] input: MCE IR Keyboard/Mouse (ir) as /devices/virtual/input/input1
[ 2.138179] rc rc0: lirc_dev: driver ir-lirc-codec (ir) registered at minor = 0
[ 2.138197] Registered IR keymap rc-mstar-tv2
[ 2.138552] input: MStar Smart TV Second IR Receiver as /devices/virtual/rc/rc1/input2
[ 2.138796] rc1: MStar Smart TV Second IR Receiver as /devices/virtual/rc/rc1
[ 2.139147] input: MCE IR Keyboard/Mouse (ir) as /devices/virtual/input/input3
[ 2.140023] rc rc1: lirc_dev: driver ir-lirc-codec (ir) registered at minor = 1
[ 2.140089] [KEY_INPUT]:key_dispatch thread start
[ 2.140099] ##################### MDrv_IR_Init elbert ##########
[ 2.194104] X driver registered successfully.
[ 2.203186]
[ 2.203188] *** ori: timekeeper.cycle_interval = 3200000
[ 2.207880]
[ 2.207881] *** after: timekeeper.cycle_interval = 2200000
[ 2.212239] exFAT: Version 1.2.7
[ 2.236498] init: /dev/hw_random not found
[ 2.247019] healthd: wakealarm_init: timerfd_create failed
[ 2.251180] healthd: No charger supplies found
[ 2.254297] healthd: BatteryStatusPath not found
[ 2.257515] healthd: BatteryHealthPath not found
[ 2.260746] healthd: BatteryPresentPath not found
[ 2.261193] init: boot time check(need add timer gap): start 'tvservice'
[ 2.265684] init: cannot find '/system/bin/run-parts', disabling 'runparts'
[ 2.273427] healthd: BatteryCapacityPath not found
[ 2.276759] healthd: BatteryVoltagePath not found
[ 2.280034] healthd: BatteryTemperaturePath not found
[ 2.283547] healthd: BatteryTechnologyPath not found
[ 2.287030] binder: 1009:1009 transaction failed 29189, size 0-0
[ 2290451] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
[ 2.290462] init: powerctl: cannot expand '${sys.powerctl}'
[ 2.290475] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
[ 2.290486] init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
[ 2.291258] [SERIAL INPUT MANAGE] Managed tty_struct(.name:ttyS0) Setup!!!
[ 2.291448] [SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
[ 2.291457] [SERIAL INPUT MANAGE] enable_serial : (len: 0)
[ 2.291466] [35mFunction = n_tty_open, Line = 1899, [KDEBUGD] enter : NA [m
[ 2.296804] serial8250: too much work for irq192
[ 2.296808] port.line 0
[ 2.296812] LCR 3
[ 2.296814] IIR c7
[ 2.296817] USR 3
[ 2.296819] MSR 10
[ 2.296822] LSR 0
[ 2.296824] UP->LCR 3
[ 2.366946] warning: `daemonsu' uses 32-bit capabilities (legacy support in use)
[ 2.439057] EXT4-fs (mmcblk0p9): re-mounted. Opts: (null)
shell@lemon:/ $ [ 2.505673] EXT4-fs (mmcblk0p9): re-mounted. Opts: (null)
[ 2.521731] EXT4-fs (mmcblk0p9): re-mounted. Opts: (null)
[ 2.529722] EXT4-fs (mmcblk0p9): re-mounted. Opts: (null)
[ 2.554731] EXT4-fs (mmcblk0p9): re-mounted. Opts: (null)
[ 2.559071] EXT4-fs (mmcblk0p9): re-mounted. Opts: (null)
[ 2.572384] EXT4-fs (mmcblk0p9): re-mounted. Opts: (null)
[ 2.595942] init: untracked pid 1046 exited
[ 2.641083] fs_mgr: Warning: unknown flag block_validity
[ 2.645836] fs_mgr: Warning: unknown flag nodiscard
[ 2.650199] fs_mgr: Warning: unknown flag data=ordered
[ 2.654715] fs_mgr: Warning: unknown flag journal_checksum
[ 2.661132] fs_mgr: Warning: unknown flag block_validity
[ 2.666064] fs_mgr: Warning: unknown flag nodiscard
[ 2.672326] fs_mgr: Warning: unknown flag data=ordered
[ 2.676880] fs_mgr: Warning: unknown flag journal_checksum
[ 2.681692] fs_mgr: Warning: unknown flag block_validity
[ 2.686317] fs_mgr: Warning: unknown flag nodiscard
[ 2.690618] fs_mgr: Warning: unknown flag data=ordered
[ 2.696092] fs_mgr: Warning: unknown flag journal_checksum
[ 2.701408] fs_mgr: Warning: unknown flag block_validity
[ 2.706435] fs_mgr: Warning: unknown flag nodiscard
[ 2.710763] fs_mgr: Warning: unknown flag data=ordered
[ 2.715269] fs_mgr: Warning: unknown flag journal_checksum
[ 3.446453] input: MStar Smart TV Keypad as /devices/virtual/input/input4
[ 3.637616] UMP<2>: New session opened
[ 3.642162] Mali<2>: Session started
[ 3.914522] [GFLIP] GFLIP DRIVER OPEN
[ 3.942746] [GFLIP] New flip function enable
[ 4.016964] init: sys_prop: permission denied uid:1002 name:persist.bt.fwdump
[ 4.602395] [0000001269][MAD_ALSA][000558] <6>Open 'subdevice #0'(0) of MStar ALSA playback device
[ 4.609682] [0000001271][MAD_ALSA][000408] <6>Open software timer.
[ 4.616533] [0000001274][MAD_ALSA][000713] <6>Configure PCM HW resource
[ 4.636962] [0000001281][MAD_ALSA][000558] <6>Open 'subdevice #0'(0) of MStar ALSA playback device
[ 4.645221] [0000001284][MAD_ALSA][000408] <6>Open software timer.
[ 4.651260] [0000001286][MAD_ALSA][000713] <6>Configure PCM HW resource
[ 5.186012] --------->MBX DRIVER OPEN
[ 5.191124] _MDrv_MBXIO_FASYNC is invoked
[ 5.226210] [GFLIP] GFLIP DRIVER OPEN
[ 5.228810] [GFLIP] New flip function enable
[ 5.238085] Mali<2>: Session 0xEEE90480 with pid 1016 was granted higher priority.
[ 6.488335] UMP<2>: New session opened
[ 6.491086] Mali<2>: Session started
[ 7.066339] czb---_mod_ir_open is invoked
[ 7.069179] ##################### MDrv_IR_Init elbert ##########
[ 7.149740] [GFLIP] GFLIP DRIVER OPEN
[ 7.152381] [GFLIP] New flip function enable
TVOS *checkPoint*
[ 9.444066] init: no such service 'renice-tvos-0'
[ 20.030020] healthd: battery l=0 v=0 t=0.0 h=1 st=1 chg=
[ 21.915479] UMP<2>: New session opened
[ 21.930327] Mali<2>: Session started
[ 21.959222] Mali<2>: Session has ended
[ 21.991311] x_fill_super_31
[ 22.008904] NTFS-fs warning (device mmcblk0p7): is_boot_sector_ntfs(): Invalid boot sector checksum.
[ 22.015514] NTFS-fs error (device mmcblk0p7): read_ntfs_boot_sector(): Primary boot sector is invalid.
[ 22.022246] NTFS-fs error (device mmcblk0p7): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
[ 22.031580] NTFS-fs error (device mmcblk0p7): ntfs_fill_super(): Not an NTFS volume.
[ 22.074759] init: no such service 'fuse_F2EE-62C5'
[ 22.080813] x_fill_super_31
[ 22.110894] NTFS-fs warning (device mmcblk1p1): is_boot_sector_ntfs(): Invalid boot sector checksum.
[ 22.117352] NTFS-fs error (device mmcblk1p1): read_ntfs_boot_sector(): Primary boot sector is invalid.
[ 22.123851] NTFS-fs error (device mmcblk1p1): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
[ 22.133097] NTFS-fs error (device mmcblk1p1): ntfs_fill_super(): Not an NTFS volume.
[ 22.193533] init: no such service 'fuse_3232-6161'
[ 25.463164] UMP<2>: New session opened
[ 25.469127] Mali<2>: Session started
[ 27.994385] UMP<2>: New session opened
[ 27.998972] Mali<2>: Session started
[ 28.800835] Mali<2>: Session has ended
[ 28.870712] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
[ 28.990537] Mali<2>: Session has ended
[ 29.012917] UMP<2>: Session closed
[ 29.045494] Initializing USB Mass Storage driver...
[ 29.049177] usbcore: registered new interface driver usb-storage
[ 29.053897] USB Mass Storage support registered.
[ 29.072911] Mstar-ehci-2 H.W init
[ 29.075286] Titania3_series_start_ehc start: 20140515
[ 29.079609] BC disable
[ 29.081790] Mstar-ehci-2 Mstar-ehci-2.1: Mstar EHCI
[ 29.085629] Mstar-ehci-2 Mstar-ehci-2.1: new USB bus registered, assigned bus number 3
[ 29.091329] Mstar-ehci-2 Mstar-ehci-2.1: irq 226, io mem 0xfd201a00
[ 29.102948] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 29.107725] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 29.113849] usb usb3: Product: Mstar EHCI
[ 29.116724] usb usb3: Manufacturer: Linux 3.1.10 ehci_hcd
[ 29.120584] usb usb3: SerialNumber: mstar
[ 29.124963] hub 3-0:1.0: USB hub found
[ 29.127636] hub 3-0:1.0: 1 port detected
[ 29.131808] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 29.136510] Mstar-ehci-1 H.W init
[ 29.138894] Titania3_series_start_ehc start: 20140515
[ 29.143393] BC disable
[ 29.145174] Mstar-ehci-1 Mstar-ehci-1.0: Mstar EHCI
[ 29.148683] Mstar-ehci-1 Mstar-ehci-1.0: new USB bus registered, assigned bus number 4
[ 29.154556] Mstar-ehci-1 Mstar-ehci-1.0: irq 199, io mem 0xfd204800
[ 29.166199] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 29.170971] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 29.177112] usb usb4: Product: Mstar EHCI
[ 29.179959] usb usb4: Manufacturer: Linux 3.1.10 ehci_hcd
[ 29.183782] usb usb4: SerialNumber: mstar
[ 29.187916] hub 4-0:1.0: USB hub found
[ 29.190604] hub 4-0:1.0: 1 port detected
[ 29.194839] Mstar-ehci-3 H.W init
[ 29.197221] Titania3_series_start_ehc start: 20140515
[ 29.201709] BC disable
[ 29.203478] Mstar-ehci-3 Mstar-ehci-3.2: Mstar EHCI
[ 29.207097] Mstar-ehci-3 Mstar-ehci-3.2: new USB bus registered, assigned bus number 5
[ 29.212931] Mstar-ehci-3 Mstar-ehci-3.2: irq 229, io mem 0xfd227200
[ 29.223988] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 29.228804] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 29.234363] usb usb5: Product: Mstar EHCI
[ 29.237265] usb usb5: Manufacturer: Linux 3.1.10 ehci_hcd
[ 29.241064] usb usb5: SerialNumber: mstar
[ 30.184841] hub 5-0:1.0: USB hub found
[ 30.187489] hub 5-0:1.0: 1 port detected
[ 30.191693] Mstar-ehci-4 H.W init
[ 30.194012] Titania3_series_start_ehc start: 20140515
[ 30.198534] BC disable
[ 30.200360] Mstar-ehci-4 Mstar-ehci-4.3: Mstar EHCI
[ 30.203938] Mstar-ehci-4 Mstar-ehci-4.3: new USB bus registered, assigned bus number 6
[ 30.209743] ==20140515==> hub_port_init 1
[ 30.212612] Plug in USB Port2
[ 30.213798] Mstar-ehci-4 Mstar-ehci-4.3: irq 217, io mem 0xfd244c00
[ 30.222018] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 30.226970] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 30.232942] usb usb6: Product: Mstar EHCI
[ 30.235787] usb usb6: Manufacturer: Linux 3.1.10 ehci_hcd
[ 30.239579] usb usb6: SerialNumber: mstar
[ 30.244067] hub 6-0:1.0: USB hub found
[ 30.246764] hub 6-0:1.0: 1 port detected
[ 30.309979] usb 3-1: new high speed USB device number 2 using Mstar-ehci-2
[ 30.353182] Bluetooth: Core ver 2.16
[ 30.356217] NET: Registered protocol family 31
[ 30.359424] Bluetooth: HCI device and connection manager initialized
[ 30.363889] Bluetooth: HCI socket layer initialized
[ 30.367332] Bluetooth: L2CAP socket layer initialized
[ 30.370925] Bluetooth: SCO socket layer initialized
[ 30.385904] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 30.407024] Bluetooth: RFCOMM TTY layer initialized
[ 30.410479] Bluetooth: RFCOMM socket layer initialized
[ 30.414151] Bluetooth: RFCOMM ver 1.11
[ 30.429247] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 30.433044] Bluetooth: BNEP filters: protocol multicast
[ 30.560678] init: untracked pid 2284 exited
[ 30.608211] usb 3-1: New USB device found, idVendor=0e8d, idProduct=7632
[ 30.612962] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 30.617991] usb 3-1: Product: BT+WIFI
[ 30.620565] usb 3-1: Manufacturer: MediaTek Inc.
[ 30.623860] usb 3-1: SerialNumber: 000000000
[ 30.635798] ==20140515==> hub_port_init 1
[ 30.638652] Plug in USB Port3
[ 30.733483] usb 5-1: new full speed USB device number 2 using Mstar-ehci-3
[ 31.054414] usb 5-1: New USB device found, idVendor=1915, idProduct=0196
[ 31.059152] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 31.064149] usb 5-1: Product: RI
[ 31.066452] usb 5-1: Manufacturer: MELE
[ 31.072269] input: MELE RI as /devices/platform/Mstar-ehci-3.2/usb5/5-1/5-1:1.0/input/input5
[ 31.081366] generic-usb 0003:1915:0196.0001: input,hidraw0: USB HID v1.10 Keyboard [MELE RI] on usb-mstar-1/input0
[ 31.091692] input: MELE RI as /devices/platform/Mstar-ehci-3.2/usb5/5-1/5-1:1.1/input/input6
[ 31.101811] generic-usb 0003:1915:0196.0002: input,hidraw1: USB HID v1.10 Mouse [MELE RI] on usb-mstar-1/input1
[ 31.121897] input: MELE RI as /devices/platform/Mstar-ehci-3.2/usb5/5-1/5-1:1.2/input/input7
[ 31.130176] generic-usb 0003:1915:0196.0003: input,hidraw2: USB HID v1.10 Device [MELE RI] on usb-mstar-1/input2
[ 31.144863] generic-usb 0003:1915:0196.0004: hiddev0,hidraw3: USB HID v1.10 Device [MELE RI] on usb-mstar-1/input3
[ 31.153445] ==20140515==> hub_port_init 1
[ 31.156344] Plug in USB Port4
[ 31.247748] usb 6-1: new low speed USB device number 2 using Mstar-ehci-4
[ 31.548657] usb 6-1: New USB device found, idVendor=1c4f, idProduct=0002
[ 31.553357] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 31.558295] usb 6-1: Product: USB Keyboard
[ 31.561143] usb 6-1: Manufacturer: SIGMACHIP
[ 31.567674] input: SIGMACHIP USB Keyboard as /devices/platform/Mstar-ehci-4.3/usb6/6-1/6-1:1.0/input/input8
[ 31.575598] generic-usb 0003:1C4F:0002.0005: input,hidraw4: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-mstar-1/input0
[ 31.586514] input: SIGMACHIP USB Keyboard as /devices/platform/Mstar-ehci-4.3/usb6/6-1/6-1:1.1/input/input9
[ 31.594512] generic-usb 0003:1C4F:0002.0006: input,hidraw5: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-mstar-1/input1
bt_load_driver mtk
[ 33.786201] Bluetooth: btmtk usb driver ver 1.0.3
[ 33.789646] btmtk_usb_probe begin
[ 33.792173] btmtk_usb_load_rom_patch begin
[ 33.795581] build Time = 20140521171022a
[ 33.795585]
[ 33.799823] platform = ALPS
[ 33.801778] HW/SW version = Š Š
[ 33.804336] Patch version =
[ 33.806277] loading rom patch...
[ 33.808765] patch_len = 20956
[ 33.810855] cur_len = 0
[ 33.812567] sent_len = 2039
[ 33.814532] sent_len + PATCH_HEADER_SIZE = 2048, phase = 1
[ 33.966451] patch_len = 20956
[ 33.968546] cur_len = 2039
[ 33.970450] sent_len = 2039
[ 33.972400] sent_len + PATCH_HEADER_SIZE = 2048, phase = 2
[ 34.060003] mtprealloc: module license 'unspecified' taints kernel.
[ 34.064436] Disabling lock debugging due to kernel taint
[ 34.069012] ==>[0]:PreBuff:0xe9280000, DmaAddr:0x51580000
[ 34.072971] ==>[1]:PreBuff:0xe92c0000, DmaAddr:0x515c0000
[ 34.076760] ==>[2]:PreBuff:0xe9300000, DmaAddr:0x51600000
[ 34.080563] ==>[3]:PreBuff:0xe9340000, DmaAddr:0x51640000
[ 34.084442] ==>[4]:PreBuff:0xe9380000, DmaAddr:0x51680000
[ 34.088268] ==>[5]:PreBuff:0xe9268000, DmaAddr:0x51568000
[ 34.092049] ==>[6]:PreBuff:0xe9270000, DmaAddr:0x51570000
[ 34.095987] ==>[7]:PreBuff:0xe9278000, DmaAddr:0x51578000
[ 34.099824] ==>[8]:PreBuff:0xe93c0000, DmaAddr:0x516c0000
[ 34.103648] ==>[9]:PreBuff:0xe93c8000, DmaAddr:0x516c8000
[ 34.107548] ==>[10]:PreBuff:0xe93d0000, DmaAddr:0x516d0000
[ 34.111430] ==>[11]:PreBuff:0xe93d8000, DmaAddr:0x516d8000
[ 34.115340] ==>[12]:PreBuff:0xe93e0000, DmaAddr:0x516e0000
[ 34.117133] patch_len = 20956
[ 34.117137] cur_len = 4078
[ 34.117140] sent_len = 2039
[ 34.117148] sent_len + PATCH_HEADER_SIZE = 2048, phase = 2
[ 34.129006] ==>[13]:PreBuff:0xe9e3a800, DmaAddr:0x5213a800
[ 34.133049] install prealloc ok
[ 34.256632] patch_len = 20956
[ 34.258689] cur_len = 6117
[ 34.260554] sent_len = 2039
[ 34.262491] sent_len + PATCH_HEADER_SIZE = 2048, phase = 2
[ 34.405392] rtw_mem_init
[ 34.407211] patch_len = 20956
[ 34.407284] rtw_mem_init, rtk_skb_mem_q len : 32
[ 34.412657] cur_len = 8156
[ 34.414571] sent_len = 2039
[ 34.416540] sent_len + PATCH_HEADER_SIZE = 2048, phase = 2
[ 34.560285] patch_len = 20956
[ 34.562371] cur_len = 10195
[ 34.564304] sent_len = 2039
[ 34.566234] sent_len + PATCH_HEADER_SIZE = 2048, phase = 2
[ 34.709820] patch_len = 20956
[ 34.711901] cur_len = 12234
[ 34.713834] sent_len = 2039
[ 34.715770] sent_len + PATCH_HEADER_SIZE = 2048, phase = 2
[ 34.863842] patch_len = 20956
[ 34.865896] cur_len = 14273
[ 34.867849] sent_len = 2039
[ 34.869812] sent_len + PATCH_HEADER_SIZE = 2048, phase = 2
[ 35.017054] patch_len = 20956
[ 35.019142] cur_len = 16312
[ 35.021166] sent_len = 2039
[ 35.023132] sent_len + PATCH_HEADER_SIZE = 2048, phase = 2
[ 35.172022] patch_len = 20956
[ 35.174099] cur_len = 18351
[ 35.176207] sent_len = 2039
[ 35.178180] sent_len + PATCH_HEADER_SIZE = 2048, phase = 2
[ 36.270088] patch_len = 20956
[ 36.272176] cur_len = 20390
[ 36.274161] sent_len = 566
[ 36.276038] sent_len + PATCH_HEADER_SIZE = 575, phase = 3
[ 36.420025] patch_len = 20956
[ 36.422082] cur_len = 20956
[ 36.424057] sent_len = 0
[ 36.425861] Send checksum req..
[ 36.460241] Bluetooth: btmtk_usb_reset_wmt:Err(8)
[ 36.460245]
[ 36.675603] btmtk_usb_load_rom_patch end
[ 36.679239] Bluetooth: Failed to load transform for ecb(aes): -2
[ 36.684323] btmtk_usb_probe end
[ 36.685973] could not open profile : /etc/Wireless/RT2870STA/BT_CONFIG.dat, skip...
[ 36.692579] usbcore: registered new interface driver btmtk_usb
[ 42.701951] UMP<2>: New session opened
[ 42.704779] Mali<2>: Session started
[ 42.739091] Mali<2>: Session has ended
[ 42.741728] UMP<2>: Session closed
[ 44.086323] binder: 2707:2716 refcount change on invalid ref 23
[ 45.215912] binder: 2707:3100 refcount change on invalid ref 23
[ 45.220095] binder: 2707:3100 refcount change on invalid ref 23
[ 45.224238] [47;31m!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! [m
[ 45.228759] binder: transaction release 21721 bad handle 23
[ 45.232729] [47;31m!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! [m
[ 45.442633] [0000011347][MAD_ALSA][000790] <6>Target sample rate is 44100
[ 45.447871] [0000011349][MAD_ALSA][000885] <6>Target channel mode is 2
[ 45.452705] [0000011350][MAD_ALSA][000404] <6>Initiate MStar PCM Playback1 engine
[ 45.458564] [0000011353][MAD_ALSA][000926] <6>Wake up Playback Monitor 0
[ 55.474241] UMP<2>: New session opened
[ 55.476994] Mali<2>: Session started
[ 55.506263] Mali<2>: Session has ended
[ 55.508904] UMP<2>: Session closed
[ 76.242075] UMP<2>: New session opened
[ 76.244824] Mali<2>: Session started
[ 76.269796] Mali<2>: Session has ended
[ 76.272489] UMP<2>: Session closed
[ 165.548578] UMP<2>: New session opened
[ 165.551316] Mali<2>: Session started
[ 165.574007] Mali<2>: Session has ended
[ 165.576653] UMP<2>: Session closed
[ 804.842704] UMP<2>: New session opened
[ 804.845453] Mali<2>: Session started
[ 804.870935] Mali<2>: Session has ended
[ 804.873572] UMP<2>: Session closed
[ 1176.247408] [0000294026][MAD_ALSA][000926] <6>Wake up Playback Monitor 0
